Vapoursynth RGBAdjust (GLSL): Difference between revisions
Shader v0.2: order, clamping, gamma direction (via update-page on MediaWiki MCP Server) |
Settings for shader v0.2 (via update-page on MediaWiki MCP Server) |
||
| Line 24: | Line 24: | ||
| Scaling (R/G/B) || RedScale, GreenScale, BlueScale || 0 – 100 || 1.00 || Multiplies the channel. | | Scaling (R/G/B) || RedScale, GreenScale, BlueScale || 0 – 100 || 1.00 || Multiplies the channel. | ||
|- | |- | ||
| Bias (R/G/B) || RedBias, GreenBias, BlueBias || -255 – 255 || 0.00 || Offset added | | Bias (R/G/B) || RedBias, GreenBias, BlueBias || -255 – 255 || 0.00 || Offset added after scaling, on the 8-bit scale. | ||
|- | |- | ||
| Gamma (R/G/B) || RedGamma, GreenGamma, BlueGamma || 0 – 100 || 1.00 || | | Gamma (R/G/B) || RedGamma, GreenGamma, BlueGamma || 0.01 – 100 || 1.00 || Gamma per channel; > 1 brightens, < 1 darkens. | ||
|} | |} | ||
Revision as of 17:22, 14 November 2026
RGBAdjust (GLSL) changes the red, green and blue channels separately on the GPU — scaling, bias and gamma per channel — with a GLSL shader run by libplacebo (vs-placebo). It is the GPU counterpart of RGBAdjust and uses the same order of steps and the same gamma direction.
Filtering → Vapoursynth → Color → Grading

What it does
For each channel the shader computes, in this order:
- multiply by Scaling,
- add Bias (on the 8-bit scale, divided by 255),
- clamp to the valid range,
- apply Gamma (the value is raised to the power 1/Gamma) and clamp again.
With the defaults (1 / 0 / 1) the picture is unchanged. Gamma values above 1 brighten and below 1 darken, as in RGBAdjust and AviSynth.
Requirements
- vs-placebo (libplacebo) and a GPU that libplacebo can use.
- Hybrid's GLSL shader folder.
Settings
| Control | Shader parameter | Range | Hybrid default | Meaning |
|---|---|---|---|---|
| Scaling (R/G/B) | RedScale, GreenScale, BlueScale | 0 – 100 | 1.00 | Multiplies the channel. |
| Bias (R/G/B) | RedBias, GreenBias, BlueBias | -255 – 255 | 0.00 | Offset added after scaling, on the 8-bit scale. |
| Gamma (R/G/B) | RedGamma, GreenGamma, BlueGamma | 0.01 – 100 | 1.00 | Gamma per channel; > 1 brightens, < 1 darkens. |
Example
A slightly warmer picture (red × 1.05, blue × 0.95) on a 10-bit YUV 4:2:0 source:
# adjusting color space from YUV420P10 to YUV444P16 for vsGLSLRGBAdjust
clip = core.resize.Bicubic(clip=clip, format=vs.YUV444P16)
# adjusting colors using GLSL RGBAdjust
with open("F:/Hybrid/64bit/vsfilters/GLSL/parameterized/RGBAdjust.glsl") as glslf:
glsl = glslf.read()
glsl = glsl.replace('#define RedScale 1.0', '#define RedScale 1.05')
glsl = glsl.replace('#define GreenScale 1.0', '#define GreenScale 1')
glsl = glsl.replace('#define BlueScale 1.0', '#define BlueScale 0.95')
glsl = glsl.replace('#define RedBias 0.0', '#define RedBias 0')
glsl = glsl.replace('#define GreenBias 0.0', '#define GreenBias 0')
glsl = glsl.replace('#define BlueBias 0.0', '#define BlueBias 0')
glsl = glsl.replace('#define RedGamma 1.0', '#define RedGamma 1')
glsl = glsl.replace('#define GreenGamma 1.0', '#define GreenGamma 1')
glsl = glsl.replace('#define BlueGamma 1.0', '#define BlueGamma 1')
clip = core.placebo.Shader(clip, shader_s=glsl, width=clip.width, height=clip.height)
# adjusting output color from YUV444P16 to YUV420P10 for NVEncModel
clip = core.resize.Bicubic(clip=clip, format=vs.YUV420P10, dither_type="error_diffusion")How Hybrid calls it
- The clip is converted to YUV444P16 first, the only format the filter accepts in Hybrid.
- Hybrid loads the shader RGBAdjust.glsl from its GLSL folder, writes all nine values into its
#definelines and runs it withplacebo.Shader. The frame size stays the same. - The shader works on RGB inside libplacebo's pipeline; the result comes back as YUV444P16.
- The filter is only offered when Hybrid's GLSL shader folder is present.
- RGBAdjust (GLSL) also offers the common options (Masked, ApplyOnlyTo, Merge, OnRegion, Gimmick).
Background
The shader
RGBAdjust.glsl is a full RGB adjustment shader for mpv, modeled after AviSynth's RGBAdjust (v0.1). Per channel it does c += Bias/255, c *= Scale, c = pow(c, Gamma).
vs-placebo (placebo.Shader)
placebo.Shader runs mpv-syntax GLSL shaders through libplacebo. The shader is passed as a file or, as Hybrid does, as a string. Input is a 16-bit YUV clip, output is always YUV444P16.
VapourSynth
Not a core filter; the VapourSynth documentation has no page for it. For the CPU version see RGBAdjust.
AviSynth (RGBAdjust)
AviSynth's RGBAdjust applies gain first, then bias, then gamma (with > 1 brightening) and clips the result; it adds analyze, dither and per-frame values. See Avisynth RGBAdjust.
Sources
- vs-placebo README
- AviSynth+ documentation: RGBAdjust
- The shader RGBAdjust.glsl shipped with Hybrid
- Hybrid's tooltips